Side by side · Specs and price

Pro Spot Alternatives: GYS and Hand Cannon, Side by Side

Pro Spot i4, i4s, i5s, PR-5D, PR-8D and AL-5 next to the GYS and Hand Cannon machines we'd quote you, using each maker's published specs.

Looking at a Pro Spot? Here's what GYS and Hand Cannon put next to it

Pro Spot builds good machines and a lot of shops run them. If you're pricing one, or replacing an older one, these tables put each Pro Spot model next to the GYS or Hand Cannon machine we'd quote you, using each maker's own published numbers. Specs and price, nothing else. You decide.

At a glance

SPOT WELDER

i4s vs GYS PTI NEO

Pro Spot i4s 220V: $33,266.63 list
GYS PTI NEO: Request pricing · Build it out

Pro Spot price found online at GM Approved Tools & Equipment, seen Oct 3 2026.

Full specs

SPOT WELDER

i5s vs GYS PTI Genius Plus

Pro Spot i5s 208–240V: $42,408.30 list
GYS PTI Genius Plus: Request pricing · Build it out

Pro Spot price found online at Mopar Essential Tools, seen Oct 3 2026.

Full specs

SPR RIVET GUN

PR-5D vs Hand Cannon SPR-5

Pro Spot PR-5D: $8,082 list
Hand Cannon SPR-5: Request pricing

Pro Spot price found online at DES, seen Oct 3 2026.

Full specs

SPR RIVET GUN

PR-8D vs Hand Cannon SPR-5-DFC

Pro Spot PR-8D: $9,719 list
Hand Cannon SPR-5-DFC: Request pricing

Pro Spot price found online at DES, seen Oct 3 2026.

Full specs

On the same OEM list: Tesla's Model Y body repair procedures name the Pro Spot i5s, i5 and i4s and the GYS PTI-S7, PTI Genius and PTI Genius Plus as spot welders for the job. Tesla service documentation. More programs on our OEM-approved page.

Pro Spot i4 and i4s vs GYS PTI NEO

Pro Spot i4Pro Spot i4sGYS PTI NEO
Max weld current12,500 A12,500 A (DC)14,000 A max · 12,100 A at 208 V
Clamp forceStd gun 156–351 daN · HP gun 260–587 daN (60–135 psi)565 daN (1,240 lb)Up to 550 daN
Input power3-phase 208–240 V, 60 A3-phase 208–240 V / 400–480 V3-phase 208–240 V, 30 A
GunPneumatic double-acting C-gunLiquid-cooled gun, 360° arm rotation, on-gun displayLiquid-cooled gun
Arms included80 mm, 500 mm, wheelhouse, X-adapter80 mm C-arm, 90 mm wheelhouse, 520 mmG1, G2, G4
CoolingWater-cooled inverter, transformer and gunLiquid loop to the tipsFully liquid-cooled
Weld recordsLogs to flash card or USBLogs by email over WiFiUSB export and PC software
Price$27,308 list
Found online: Honda/Acura Essential Tools, i4 208–240V with PS-600 gun (PROI4220V600), seen Oct 3 2026
$33,266.63 list (220V) · $34,333.30 (480V)
Found online: GM Approved Special Tools & Equipment PROI4S220V and PROI4S480V, seen Oct 3 2026
Request pricing · Build it out · See the NEO

Pro Spot i5s vs GYS PTI Genius Plus

Pro Spot i5sGYS PTI Genius Plus
Max weld current14,500 A (DC)14,500 A
Clamp force565 daN (1,240 lb)Up to 600 daN (1,349 lbf)
GunTransformer gun, liquid-cooled to the tips, 360° arm rotationDual-sided integrated transformer gun, liquid-cooled, 360° rotation, 27.3 lb
BoomErgo Lift Assist motorized boomMotorized overhanging boom, motorized height, 55 in reach
Input power3-phase 208–240 V / 400–480 V3-phase 200–240 V, 50 A breaker
Weld cable16.4 ft19.7 ft liquid-cooled interconnection
ModesAdaptive auto with optical thickness calibrationAutomatic · Synergic · OEM · Manual
Weld recordsLogs by email over WiFiUSB export, spot counter for cap life
Price$42,408.30 list (208–240 V) · $43,697.50 (400–480 V)
Found online: Mopar Essential Tools PROI5S220V and PROI5S480V, seen Oct 3 2026
Request pricing · Build it out · See the Genius Plus

Pro Spot PR-5D and PR-8D vs Hand Cannon

Pro Spot PR-5DPro Spot PR-8DHand Cannon SPR-5Hand Cannon SPR-5-DFC
Force10–50 kN20–80 kN, set to an exact value25–55 kN, manual knobUp to 80 kN, digital control, 9 presets
Stroke45 mm50 mm35–40 mm—
Cycle time3–5 s3–5 s5–8 s—
BatteryTwo 18V Li-ion, 2 h charge, ~250 cyclesTwo 18V Li-ion, 2 h charge, ~250 rivets18V 4Ah, ~1 h charge, 130–350 cyclesTwo 18V 4Ah, ~1 h charge
ReadoutOn-board screen, cycle log, service alarmsForce readout, data logging, Bluetooth—Live and achieved pressure, work time, battery
DiesMagneticnot printedMagnetic post-style threadlessMagnetic post-style threadless
Price$8,082 list
Found online: DES (Bosch dealer equipment program), PR-5D Rivet Gun System (186-PR-5D-BASIC); riveting and bonding work station lists at $11,242, seen Oct 3 2026
$9,719 list
Found online: DES (Bosch dealer equipment program), PR-8D Riveter System, JLR kit (186-PR-8-Basic-JLR), seen Oct 3 2026
Request pricing · See itRequest pricing · See it

More on the Hand Cannon guns: riveting and bonding.

Pro Spot AL-5 and MWS aluminum stations vs GYS

Pro Spot AL-5Pro Spot MWS-AL station (DA-3)GYSPOT ALU PRO FVGYSPOT Arc Pull 200
ProcessCapacitor dischargeDrawn arc, no gas requiredCapacitor discharge, ≈3 ms pulseDrawn arc with gas protection
Input power110–220 V auto-detect, 5–12 A200–230 V 1-phase, 20 AFlexible voltage 85–265 V220 V
Studs / keys4×16 mm standard · M5, M6, M8 optionalAluminum pull keys and threaded studsM4–M6 studsAluminum and steel studs and keys up to Ø 0.23 in
Gun / controlSingle weld-time knobAuto and manual modes, saved programsMicroprocessor control, automatic gunLinear-motor digital gun, dual ground electrodes, synergic and manual
StationPull bar and Pro Pull optionalCart, pull bar, pull gun, hammers, heat gun, IR thermometer800 and 1600 cart kits available1600 cart kit and Expert 200 combi available
PriceDealer quoteDealer quoteRequest pricing · See itRequest pricing · See it

Capacitor discharge or drawn arc? Our aluminum dent repair guide walks through it.

Running a program? If an automaker program names the machine you need, that list decides. Our OEM-approved page shows which programs approve or set the spec for each GYS machine we sell. Pro Spot publishes its own OEM approval sheets on each model's page.

Questions shops ask

What is the GYS equivalent of a Pro Spot i4 or i4s?

The closest match is the GYS PTI NEO: 14,000 A maximum (12,100 A at 208 V), up to 550 daN of clamp force, 3-phase 208–240 V on a 30 A circuit, fully liquid-cooled, with G1, G2 and G4 arms. The full side-by-side is in the table above.

What is the GYS equivalent of a Pro Spot i5s?

The GYS PTI Genius Plus. Both are transformer-gun machines at 14,500 A. The Genius Plus prints up to 600 daN of clamp force, a motorized overhanging boom and a 50 A breaker.

Is there a Hand Cannon equivalent to the PR-5D and PR-8D rivet guns?

Yes. The Hand Cannon SPR-5 (25–55 kN) sits against the PR-5D, and the SPR-5-DFC (up to 80 kN with digital force control) against the PR-8D. Our prices for both are on the store and in the table above.

Can I trade in my Pro Spot?

Yes. We take Pro Spot spot welders, MIG welders and rivet guns in trade toward new GYS or Hand Cannon equipment. See the trade-in section on our used Pro Spot page.

Where do these specs come from?

Pro Spot figures are from Pro Spot's published brochures, spec sheets and component lists. GYS and Hand Cannon figures are from the GYS datasheets and our product pages. Where a manufacturer doesn't print a value, the table says so. Pro Spot doesn't publish machine prices on its own site. Where a Pro Spot price is shown, it is a list price we found online for that configuration, with the seller and the date we saw it; actual dealer pricing varies. Where no published US price exists, the cell says dealer quote. Our prices are read live from our store.

Have a Pro Spot now?

Trade it in toward a new GYS or Hand Cannon, or buy one of ours reconditioned.

Pro Spot, i4, i4s, i5s, PR-5D, PR-8D, AL-5 and MWS are names of Pro Spot International. Pro Spot figures are taken from Pro Spot's published brochures, spec sheets and component lists (read September 2026); where Pro Spot's own documents give two figures, the spec sheet is used. CRTE is not affiliated with Pro Spot International.

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Close
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.