Hand Cannon · Self-piercing riveting

Riveting and Bonding Tools for Collision Repair

Cordless self-piercing rivet guns, rivets, arms and dies for the riveted and bonded joints on today's vehicles. Built for value, priced so every tech can have one.

Riveting and bonding, without the dealer-list price

More of every new vehicle is held together with self-piercing rivets and structural adhesive, and the repair procedures say to put it back the same way. Hand Cannon is our own SPR gun line, built for that work and priced so every tech in the shop can have one instead of waiting on the one gun the shop shares.

  • Flat rivets. The gun and the arms come out of the same factory, and the arm flex is engineered out, so the rivet sets flat.
  • Post-style magnetic dies at about a quarter of the price of screw-in dies.
  • Cordless 18V lithium. No air hose or hydraulic pump across the floor.
  • Thousands in service, sold and supported from Pompton Plains, NJ: demo, training and parts from one desk.

Pick your gun

Hand Cannon SPR-5Hand Cannon SPR-5-DFC
Output force25–55 kN, adjustable (manual knob)Up to 80 kN, digital push-button control
Presets / displayPressure accuracy ±3%9 presets · live pressure, achieved pressure, work time, battery level
Work cycle5–8 seconds—
Stroke35–40 mm—
Battery18V 4Ah lithium, about 1-hour charge, 130–350 cycles per chargeTwo 18V 4Ah lithium batteries, about 1-hour charge
ArmsQuick arm-change systemSPR-40 42 mm included · SPR-130 128 mm and SPR-220 222 mm optional
DiesStandard die kit includedMagnetic post-style threadless dies, standard kit included
JobsSPR, solid rivets, flow-form, pin and collar, rivet removal, flattening, calibrating punchSame, with force logged on screen
PriceRequest pricing · See the SPR-5Request pricing · See the SPR-5-DFC

Specs from the Hand Cannon product pages and brochures. Prices are read live from our store.

Everything else the job takes

Self-piercing rivets

Rivets by diameter and length in 10- and 50-packs, matched to the Hand Cannon dies.

Shop self-piercing rivets →

Arms and extensions

130 mm and 220 mm extended-depth arms for deep flanges, pillars and rails.

130 mm arm →   220 mm arm →

Riveting accessories

Dies, batteries, blind-rivet adapters and service parts for the guns and presses we sell.

Shop riveting accessories →

GYSPRESS 10T

GYS's hydraulic riveting press for self-piercing and blind rivets. Approved for Rivian's certified collision network.

See the GYSPRESS 10T →

Bonding first, rivets second. Most procedures call for adhesive on the flange before the rivet goes in, then a set cure time before sanding or refinish. Follow the OEM procedure for the vehicle on your bench; it sets the adhesive, the rivet, the spacing and whether a joint can be riveted at all. For which machines each automaker approves, see OEM-approved spot welders and riveters.

Questions shops ask

What is a riveting and bonding repair?

On many late-model vehicles the factory joins panels with self-piercing rivets (SPR) and structural adhesive instead of spot welds, often on aluminum or mixed-material joints that can't be welded. The repair procedure calls for the same thing: adhesive on the flange, then rivets set to the OEM's spacing, with the right rivet and die for the stack.

Which Hand Cannon do I need, the SPR-5 or the SPR-5-DFC?

The SPR-5 covers 25–55 kN with a manual pressure knob and is priced so every tech can have one. The SPR-5-DFC goes up to 80 kN with push-button digital force control, nine presets and a live pressure readout, for shops that want the setting locked in and shown on screen.

Do Hand Cannon dies cost less than screw-in dies?

Yes. Hand Cannon uses magnetic, post-style threadless dies that run about a quarter of the price of the screw-in dies other guns use, and they change in seconds.

Is Hand Cannon on OEM equipment lists?

No, and we don't claim it is. If your program names a specific rivet tool, check that list first. For programs that name machines we sell, see our OEM-approved page.

Can you show it to my techs before I buy?

Yes. We demo the guns in the shop and train the techs on setup, die selection and rivet removal.

Put one in every tech's hands

Ask about outfitting the whole shop, and a demo at your shop.

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Close
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.