OEM-Approved Spot Welders and Riveters
Which automakers approve or set the spec for each spot welder and riveter we sell: 18 automakers, the program each one runs, and the document behind every row.
Find your automaker, see which machine qualifies
Body shops get asked the same question by every program: is your spot welder on the list? This page answers it for the machines we sell. Each automaker is listed with the program it runs, the tier each machine reaches, and the document it comes from.
By automaker
| Automaker and program | Our machines and how they qualify | Where it comes from |
|---|---|---|
| TeslaTesla Approved Collision Center program | PTI Genius Plus · ApprovedPTI Genius (PTI.G) · Approved | Tesla tooling list (Feb 2026) / approved-welder pages · GYS catalogue 2026, p. 60 · GYS letter/sheet: TESLA – Approved Welders, April 20 2026 |
| GM — Chevrolet · Buick · GMC · CadillacGM Collision Repair Network (CRN) | PTI Genius Plus · Meets specPTI NEO · Meets specPTI Genius (PTI.G) · Meets specWhat the OEM asks for: ≥12,000 A · ≥350 daN · SMART weld confirmation · approved GM software ID | GYS letter/sheet: GYS letter The following products meet the requirements of GENERAL MOTORS, April 19 2023 · GM CRN 2026 Tools & Equipment, p. 2 (gmparts.com) |
| FordFord Certified Collision Network (FCCN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: 220 V three-phase or hybrid inverter · ≥10,000 A · ≥600 lb (267 daN) | Ford FCCN Requirements 5955R04 (Nov 2024) |
| Chrysler · Dodge · Jeep · RamOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: 10,000 A · 600 lbf (270 daN) | CPN C.O.R.E. requirements (OEConnection) |
| Alfa RomeoOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: 10,000 A · 600 lbf (270 daN) | CPN C.O.R.E. requirements (OEConnection) |
| Honda · AcuraHonda & Acura ProFirst Certified Collision | PTI Genius Plus · ApprovedPTI NEO · Meets specPTI Expert · ApprovedWhat the OEM asks for: STRSW >9,000 A · clamp force ≥350 kg (772 lb / 344 daN) · manual settings required | GYS catalogue 2026, p. 60 · Honda/Acura ProFirst Required Tools & Equipment (hondaandacuracertifiedcollision.com, read Sep 15 2026) |
| Toyota · LexusApproval as published by GYS | PTI Genius Plus · ApprovedPTI NEO · ApprovedPTI Master · ApprovedPTI Expert · Approved | GYS catalogue 2026, p. 60 |
| NissanApproval as published by GYS | PTI Genius Plus · ApprovedPTI NEO · ApprovedPTI Master · ApprovedPTI Expert · Approved | GYS catalogue 2026, p. 60 |
| HyundaiOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specPTI Master · Meets specWhat the OEM asks for: 10,000 A · 600 lbf (270 daN) | CPN C.O.R.E. requirements (OEConnection) · GYS catalogue 2026, p. 60 |
| GenesisOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: 10,000 A · 600 lbf (270 daN) | CPN C.O.R.E. requirements (OEConnection) |
| KiaOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: 10,000 A · 600 lbf (270 daN) | CPN C.O.R.E. requirements (OEConnection) |
| RivianRivian Certified Collision Center (RCCC) / Fleet Center (RCFC) | PTI Genius Plus · ApprovedPTI Expert · ApprovedGYSPRESS 10T riveter · Approved | GYS catalogue 2026, p. 60 |
| VinFastOEC Collision Performance Network (CPN) | PTI Genius Plus · Meets specPTI NEO · Meets specWhat the OEM asks for: >12,000 A · >350 daN | CPN VinFast requirements (OEConnection) |
| BMW · MINI · Rolls-RoyceBMW NA Certified Collision Repair Center (CCRC) | PTI Genius (PTI.G) · Approved | GYS letter/sheet: GYS product sheet with BMW part numbers + BMW charger note (Nov 3 2021) |
| VolkswagenVW Certified Collision Repair Facility (Volkswagen of America) | PTI Genius (PTI.G) · Approved | GYS letter/sheet: VW AG workshop-equipment sheets (© Volkswagen AG, 10/2024; booster sheet 07/2026) |
| Mercedes-BenzApproval as published by GYS | PTI Genius Plus · Meets specPTI NEO · Meets specPTI Master · Meets specPTI Genius (PTI.G) · Meets specPTI Expert · Meets spec | GYS letter/sheet: GYS letter meet the requirements of MERCEDES-BENZ AG, September 15 2025 |
| Jaguar · Land RoverApproval as published by GYS | PTI Genius Plus · Meets specPTI NEO · Meets specPTI Master · Meets specPTI Genius (PTI.G) · Meets specPTI Expert · Meets spec | GYS catalogue 2026, p. 60 · GYS letter/sheet: GYS letter meet the requirements of JAGUAR LAND-ROVER, September 15 2025 (land_rover/uk is the same file) |
| VolvoApproval as published by GYS | PTI Genius Plus · Meets specPTI NEO · Meets specPTI Master · Meets specPTI Genius (PTI.G) · Meets specPTI Expert · Meets spec | GYS catalogue 2026, p. 60 · GYS letter/sheet: GYS letter meet the requirements of VOLVO, September 15 2025 |
Sources are the automakers' program documents and GYS's own approval documents and 2026 catalogue (p. 60). Re-checked every 60 days. Last checked September 2026.
By machine
GYSPOT PTI Genius Plus
Inverter spot welder · 14,500 A · 600 daN · motorized boom, auto mode
ApprovedTesla, Honda · Acura, Toyota · Lexus, Nissan, Rivian
Meets specGM — Chevrolet · Buick · GMC · Cadillac, Ford, Chrysler · Dodge · Jeep · Ram, Alfa Romeo, Hyundai, Genesis, Kia, VinFast, Mercedes-Benz, Jaguar · Land Rover, Volvo
GYSPOT PTI Genius (PTI.G)
Inverter spot welder · the platform behind VW's VAS 821 101A and BMW's C7502654/5
ApprovedTesla, BMW · MINI · Rolls-Royce, Volkswagen
Meets specGM — Chevrolet · Buick · GMC · Cadillac, Mercedes-Benz, Jaguar · Land Rover, Volvo
GYSPOT PTI NEO
Inverter spot welder · 14,000 A max (12,100 A at 208 V) · 550 daN · G1, G2, G4 arms
ApprovedToyota · Lexus, Nissan
Meets specGM — Chevrolet · Buick · GMC · Cadillac, Ford, Chrysler · Dodge · Jeep · Ram, Alfa Romeo, Honda · Acura, Hyundai, Genesis, Kia, VinFast, Mercedes-Benz, Jaguar · Land Rover, Volvo
GYSPOT PTI Master
NEO platform with the G1, G2, G4 and G9 arm set
ApprovedToyota · Lexus, Nissan
Meets specHyundai, Mercedes-Benz, Jaguar · Land Rover, Volvo
GYSPOT PTI Expert
Inverter spot welder for steel and high-strength steel
ApprovedHonda · Acura, Toyota · Lexus, Nissan, Rivian
Meets specMercedes-Benz, Jaguar · Land Rover, Volvo
GYSPRESS 10T riveter
Hydraulic riveting press · self-piercing and blind rivets
ApprovedRivian
Hand Cannon SPR-5 and SPR-5-DFC
Our own self-piercing rivet guns. Hand Cannon isn't on an automaker's equipment list, and we don't claim it is. We put the money into the tool instead: the gun and the arms come out of the same factory, the arm flex is engineered out so rivets set flat, and the post-style dies cost about a quarter of screw-in dies.
How to read the tiers
Approved
The automaker or its program names the machine on its own approved-equipment list, or GYS publishes the approval for that automaker. Where the OEM uses its own word (Tesla Approved, VW part number, BMW part number), we show that.
Meets spec
The program publishes a spec instead of a list (GM CRN, Ford FCCN, the OEConnection CPN programs, Honda ProFirst), or GYS has a letter stating the machine meets the automaker's requirements. Where there's a published spec, we put the OEM's numbers next to the numbers GYS prints for the machine. That comparison is ours.
Listed
The machine appears in an OEM or program document without a formal approval. None of the machines on this page sit at this tier today.
Questions shops ask
Which spot welder is approved by the most automakers?
Of the machines we sell, the GYSPOT PTI Genius Plus covers the most programs on this page: approved for Tesla, Rivian, Honda and Acura, Toyota and Lexus, and Nissan, and meeting the published spec for GM, Ford, the CPN programs (Chrysler, Dodge, Jeep, Ram, Alfa Romeo, Hyundai, Genesis, Kia, VinFast), Mercedes-Benz, Jaguar Land Rover and Volvo.
What's the difference between Approved and Meets spec?
Approved means the automaker's program names the machine, or GYS publishes that automaker's approval. Meets spec means the program sets minimum numbers (current, clamp force, power) instead of naming machines, and the machine's published figures meet or beat them. Some spec programs add their own conditions, such as GM's weld confirmation and approved software ID, so read the program's full requirement before you buy.
Does the PTI NEO meet the GM, Ford and CPN requirements?
On the published numbers, yes. GYS prints 14,000 A maximum (12,100 A at 208 V) and 550 daN of clamp force for the NEO. GM CRN asks for at least 12,000 A and 350 daN, Ford FCCN for at least 10,000 A and 600 lb (267 daN), and CPN for 10,000 A and 600 lbf (270 daN).
Is the Hand Cannon rivet gun OEM approved?
No, and we don't say it is. Hand Cannon is built to be the best-value self-piercing rivet gun a shop can put in every tech's hands, with arms engineered so the rivet sets flat. If your program names a specific rivet tool, check that list first. We'll help you read it.
How current is this list?
We keep a registry of each automaker's program documents and GYS's own approval documents, and re-check it every 60 days. OEM programs change without notice, so confirm the requirement with your program before you buy. Call us and we'll walk through it with you.
Do you install and train on these machines?
Yes. We deliver, install and train on every spot welder we sell, and we support it after the sale from Pompton Plains, New Jersey.
Not sure which machine your program needs?
Send us the program and the vehicles you repair. We'll tell you which machine fits, what it costs installed, and how long training takes.


















