Chief Alternatives: GYS, Side by Side
Chief MI300i, MI200T, MultiMig 522 and the MultiTool Aluminum Dent Repair Station next to the GYS machines we'd quote you, using each maker's published specs.
Looking at a Chief? Here's what GYS puts next to it
Chief Collision Technology sells well-known welders through a national dealer network, and a lot of shops run them. If you're pricing one, or replacing an older Elektron-era unit, these tables put each Chief model next to the GYS machine we'd quote you, using each maker's own published numbers. Specs and price, nothing else. You decide.
At a glance
SPOT WELDER
MI300i vs GYS PTI Genius Plus
Chief MI300i STRW Smart Welder: $20,454.42 list
GYS PTI Genius Plus: Request pricing · Build it out
Chief price found online at GM Approved Tools & Equipment (CASMI300I), seen Oct 3 2026.
SPOT WELDER
MI200T vs GYS PTI NEO
Chief MI200T with Gyro arm: $15,115 list
GYS PTI NEO: Request pricing · Build it out
Chief price found online at DES (Bosch dealer equipment program) (105-CEL025000), seen Oct 3 2026.
MIG WELDER
MultiMig 522 vs GYS Autopulse 220-M2
Chief MultiMig 522, standard and push-pull torch: $14,666.65 list
GYS Autopulse 220-M2: Request pricing
Chief price found online at GM Approved Tools & Equipment (EL900010), seen Oct 3 2026.
ALUMINUM DENT REPAIR
MultiTool station vs GYSPOT ALU PRO FV
Chief MultiTool Aluminum Dent Repair Station, complete: $8,684.44 list
GYSPOT ALU PRO FV: Request pricing
Chief price found online at GM Approved Tools & Equipment (CASEL930013), seen Oct 3 2026.
Chief MI300i / Mi300T vs GYS PTI Genius Plus
| Chief MI300i / Mi300T GM lists it as MI300i; Chief's current cutsheet is titled Mi300T | GYS PTI Genius Plus | |
|---|---|---|
| Max weld current | 14,500 A DC (at 230 V) | 14,500 A |
| Clamp force | 550 daN at 8 bar (1,236 lbf at 116 psi) | Up to 600 daN (1,349 lbf) |
| Gun | "GENIUS clamp" with automatic electrode retraction; 80 mm automatic opening (20 mm at rest); water-cooled cables, electrodes and caps | Dual-sided integrated transformer gun, liquid-cooled, 360° rotation, 27.3 lb |
| Boom | Electric boom, adjusts to any level at a switch | Motorized overhanging boom, motorized height, 55 in reach |
| Arms | G-series arms G1–G8 available; automatic water-line connection on arm change | G1 included (G-series arms available) |
| Input power | 3-phase | 3-phase 200–240 V, 50 A breaker |
| Cable reach | 19.8 ft welder to gun | 19.7 ft liquid-cooled interconnection |
| Modes | Normal · Manual · Multi · Auto · Manufacturer · Energy; AUTO mode reads steel type and sheet thickness | Automatic · Synergic · OEM · Manual |
| Weld records | Each spot saved to SD card; 5.7 in LCD; spot counter for cap life | USB export, spot counter for cap life |
| Price | $20,454.42 list Found online: GM Approved Special Tools & Equipment CASMI300I "MI300i STRW Smart Welder", seen Oct 3 2026 | Request pricing · Build it out · See the Genius Plus |
Chief MI200T vs GYS PTI NEO
| Chief MI200T | GYS PTI NEO | |
|---|---|---|
| Max weld current | 14,500 A DC (at 230 V) | 14,000 A max · 12,100 A at 208 V |
| Clamp force | not printed on the cutsheet | Up to 550 daN |
| Input power | 3-phase 208–240 V; typically a 40 A service | 3-phase 208–240 V, 30 A |
| Gun | Transformer pliers, liquid-cooled to the tips | Liquid-cooled gun |
| Arms included | 360° Gyro C-arm; other C-arms optional; C11 single-sided kit | G1, G2, G4 |
| Cable reach | Nearly 20 ft | not printed |
| Modes / records | TrueAutoMode sets parameters per weld; logs data for each repair | Automatic · Synergic · Manual; USB export and PC software |
| Support | Overhead balancer | Balancer arm |
| Price | $15,115 list Found online: DES (Bosch dealer equipment program) MI-200T with Gyro (105-CEL025000), seen Oct 3 2026 | Request pricing · Build it out · See the NEO |
Chief MultiMig 522 vs GYS Autopulse 220-M2
| Chief MultiMig 522 | GYS Autopulse 220-M2 | |
|---|---|---|
| Process | Pulse and double-pulse MIG/MAG, MIG brazing; synergic, pulse synergic or conventional | Pulse and double-pulse MIG/MAG, MIG brazing |
| Output | 15–200 A · 200 A at 60% · 160 A at 100% (40 °C) | 15–220 A |
| Torches | Two mounted at once: standard MIG torch (11.5 ft) and push-pull torch (13 ft) with fingertip current adjust | Two integrated 4-roll feeders; torches for steel and aluminum (aluminum torch 250 A) |
| Wire | Two independent gear motors; Ø 200 mm / 5 kg or Ø 300 mm / 15 kg spools | Ø 0.6–1.2 mm; torch detected on the trigger |
| Input power | Single-phase 230 V, 30 A slow-blow; PFC | Single-phase 208–240 V with digital PFC |
| Programs | Synergic programs for Fe, stainless, aluminum, CuSi3 and flux-core | 57 synergic curves, 500 saved programs |
| Weight | 165 lb, built-in cart with cylinder storage | Frame carries two cylinders |
| Price | $14,666.65 list Found online: GM Approved Special Tools & Equipment EL900010 with standard and push-pull torch; Mopar Essential Tools $14,520 for the same item, seen Oct 3 2026 | Request pricing · Request pricing |
Three torches: the Chief MultiMig 525 mounts three torches (steel, aluminum, brazing) at 20–200 A on a 16 A single-phase circuit; its GYS counterpart is the Autopulse 220-M3 (Request pricing). One torch: the MultiMig 511 lists at $8,908.88 with the push-pull torch and $6,199.99 with a standard torch (GM, EL900012 / EL900011, seen Oct 3 2026). More on the line: GYS MIG welders.
Chief MultiTool Aluminum Dent Repair Station vs GYSPOT ALU PRO FV
| Chief MultiTool station (M30 Pro Alu) | GYSPOT ALU PRO FV with 1600 cart | |
|---|---|---|
| Process | Capacitor discharge, aluminum and steel | Capacitor discharge, ≈3 ms pulse |
| Input power | Single-phase 115 V, 15 A | Flexible voltage 85–265 V |
| Studs | 3–6 mm aluminum or titanium studs on clean bare aluminum | M4–M6 studs |
| Gun / control | Stud gun with 2-clamp ground cables, on a slide-out tray | Microprocessor control, automatic gun |
| Station | Mobile cabinet (270 lb) with three drawers, 90 cm anodized pulling bar kit, small pulling system, four aluminum hammers, heat gun, temperature crayons, starter studs | 800 and 1600 cart kits with pulling bar and tools |
| Price | $8,684.44 list (complete station) Found online: GM Approved Special Tools & Equipment, Aluminum Repair Center › Dent Repair, CASEL930013, seen Oct 3 2026 | Request pricing · See it · drawn-arc option: GYSPOT Arc Pull 200 |
Capacitor discharge or drawn arc? Our aluminum dent repair guide walks through it.
Questions shops ask
What is the GYS equivalent of a Chief MI300i or Mi300T?
The GYS PTI Genius Plus. Both are 14,500 A transformer-gun spot welders with an automatic mode that reads steel type and thickness, liquid cooling to the tips, a motorized boom and G-series arms. The full side-by-side is in the table above.
What is the GYS equivalent of a Chief MI200T?
The GYS PTI NEO is the closest match: 14,000 A maximum (12,100 A at 208 V), up to 550 daN, 3-phase 208–240 V on a 30 A circuit, fully liquid-cooled, with G1, G2 and G4 arms.
What is the GYS equivalent of a Chief MultiMig 522 or 525?
The GYS Autopulse 220-M2 for the two-torch 522 and the Autopulse 220-M3 for the three-torch 525. All are single-phase pulsed MIG/MAG machines with separate feeders for steel, aluminum and brazing wire.
What does GYS offer against the Chief MultiTool Aluminum Dent Repair Station?
The GYSPOT ALU PRO FV, a capacitor-discharge aluminum stud welder, with the 1600 cart kit for the pulling bar and tools. If you'd rather pull with drawn-arc, the GYSPOT Arc Pull 200 handles aluminum and steel.
Can I trade in my Chief welder?
Yes. We take Chief and Elektron spot welders, MIG welders and dent repair stations in trade toward new GYS or Hand Cannon equipment. See the trade-in section on our used equipment page.
Where do these specs and prices come from?
Chief figures are from Chief Collision Technology's published cutsheets and product pages. GYS figures are from the GYS datasheets and our product pages. Where a manufacturer doesn't print a value, the table says so. Chief doesn't publish machine prices on its own site. Where a Chief price is shown, it is a published list price for that configuration, with the seller and the date we saw it; actual dealer pricing varies. Our prices are read live from our store.
Have a Chief or Elektron now?
Trade it in toward a new GYS or Hand Cannon, or ask us about reconditioned equipment.
Chief, Chief Collision Technology, Elektron, MultiSpot, MultiMig, MultiTool and TrueAutoMode are names of Vehicle Service Group / Dover Corporation. Chief figures are taken from Chief's published cutsheets (Mi300T 08/22, MI200T 03/18, MultiMig 522 10/16, MultiMig 525 10/18, M30 05/23, MultiTool Workstation 10/19) and automaker program listings (read October 2026); where Chief's own documents give two figures, the cutsheet is used. CRTE is not affiliated with Chief or Vehicle Service Group.
