Car-O-Liner Alternatives: GYS and Hand Cannon, Side by Side
Car-O-Liner CTR9, CMI300 Pulse, CR200 and PNP90 XT2 next to the GYS and Hand Cannon machines we'd quote you, using each maker's published specs.
Looking at a Car-O-Liner? Here's what GYS and Hand Cannon put next to it
Car-O-Liner builds solid, OEM-approved welders and a lot of shops run them. If you're pricing one, or replacing an older one, these tables put each Car-O-Liner model next to the GYS or Hand Cannon machine we'd quote you, using each maker's own published numbers. Specs and price, nothing else. You decide.
At a glance
SPOT WELDER
CTR9 vs GYS PTI Genius Plus
Car-O-Liner CTR9 208V: $40,052.18 list
GYS PTI Genius Plus 208–240V: Request pricing · Build it out
Car-O-Liner price found online at GM Approved Tools & Equipment (CARNA90576), seen Oct 3 2026.
MIG WELDER
CMI300 Pulse Trio vs GYS Autopulse 220-M3
Car-O-Liner CMI300 Pulse Trio: $15,317 list
GYS Autopulse 220-M3: Request pricing
Car-O-Liner price found online at DES (Bosch dealer equipment program) (CARNA90573), seen Oct 3 2026.
DENT REPAIR
CR200 vs GYSPOT Arc Pull 200
Car-O-Liner CR200 spotter: $8,388.36 list
GYSPOT Arc Pull 200: Request pricing
Car-O-Liner price found online at Toyota/Lexus Approved Dealer Equipment (CAR48201), seen Oct 3 2026.
SPR RIVET SYSTEM
PNP90 XT2 vs Hand Cannon SPR-5-DFC
Car-O-Liner PNP90 XT2: Dealer quote
Hand Cannon SPR-5-DFC: Request pricing
No published US price for the PNP90
We found no Car-O-Liner rivet system on any US automaker program price list as of Oct 3 2026.
Car-O-Liner CTR9 vs GYS PTI Genius Plus and PTI NEO
| Car-O-Liner CTR9 | GYS PTI Genius Plus | GYS PTI NEO | |
|---|---|---|---|
| Max weld current | 16.0 kA max · 14.1 kA at 100% duty (208 V) · 15.8 kA (460 V) | 14,500 A | 14,000 A max · 12,100 A at 208 V |
| Clamp force | 350–640 daN (787–1,439 lbf) | Up to 600 daN (1,349 lbf) | Up to 550 daN |
| Gun | Lightweight transformer gun, 355° swivel handle, ergo-grip | Dual-sided integrated transformer gun, liquid-cooled, 360° rotation, 27.3 lb | Liquid-cooled gun |
| Boom / support | Telescopic support arm with integrated balancer, adjusts vertically and horizontally | Motorized overhanging boom, motorized height, 55 in reach | Balancer arm |
| Arms included | Water-cooled C-yokes 40 mm, 80 mm, 350 mm, 500 mm | G1 (other G-arms available) | G1, G2, G4 |
| Input power | 3-phase 208 V, 230 V, 400 V or 460 V versions | 3-phase 200–240 V, 50 A breaker | 3-phase 208–240 V, 30 A |
| Cooling | Water-cooled yokes; 20 L tank, 1,000 W cooling, 3 L/min | Liquid-cooled to the tips | Fully liquid-cooled |
| Cable reach | 236 in (19.7 ft) | 19.7 ft liquid-cooled interconnection | not printed |
| Modes / control | Fully automatic, CANBUS communication, LED control panel | Automatic · Synergic · OEM · Manual | Automatic · Synergic · Manual |
| Weld records | Optional WeldLogger PC software (36590) | USB export, spot counter for cap life | USB export and PC software |
| Price | $40,052.18 list (208 V) · $38,930.76 Toyota/Lexus Found online: GM Approved Special Tools & Equipment CARNA90576 with 40/80/350/500 mm C-yokes; Toyota/Lexus same configuration, seen Oct 3 2026 | Request pricing · Build it out · See the Genius Plus | Request pricing · Build it out · See the NEO |
Car-O-Liner CMI300 Pulse Trio vs GYS Autopulse 220-M3
| Car-O-Liner CMI300 Pulse Trio | GYS Autopulse 220-M3 | |
|---|---|---|
| Process | Pulse and double-pulse MIG/MAG, MIG brazing | Pulse and double-pulse MIG/MAG, MIG brazing |
| Output | 200 A at 100% duty · 230 A at 60% (40 °C) | 15–220 A |
| Torches | Three: 0.8 steel (ML150), 1.2 aluminum (ML240), 1.0 brazing (ML240), 3 m | Three: steel 150 A, brazing 150 A, aluminum 250 A, each on its own 4-roll feeder |
| Wire | Three 5 kg coils; machine detects the active torch | Ø 0.6–1.2 mm; three integrated feeders, torch detected on the trigger |
| Input power | 3-phase (3 × 400 V in Car-O-Liner's catalogue; US voltage versions available) | Single-phase 208–240 V with digital PFC |
| Programs | 36 pre-set programs, arc adjust, four-roll feed | 57 synergic curves, 500 saved programs, Easy / Expert / Advanced interface |
| Records / updates | Weld data log to SD card; software updates by SD card | Machine and synergies update by USB |
| Cart | Optional overhead torch holder | Frame carries two cylinders; balancer arm option |
| Price | $15,317 list (Trio package) Found online: DES (Bosch dealer equipment program) CARNA90573; GM $13,872.21, Toyota $13,483.80 for the same unit, seen Oct 3 2026 | Request pricing · Request pricing |
Two-torch version: the Car-O-Liner CMI300 Pulse Duo lists at $12,607 (DES CARNA90574; GM $11,892.21; seen Oct 3 2026). Its GYS counterpart is the Autopulse 220-M2, the same generator with two feeders. More on the GYS line: GYS MIG welders.
Car-O-Liner CR200 vs GYSPOT Arc Pull 200
| Car-O-Liner CR200 spotter | GYSPOT Arc Pull 200 | |
|---|---|---|
| Process | Short-cycle stud welding, steel and aluminum | Drawn arc with gas protection, aluminum and steel |
| Input power | Single-phase 230 V (Car-O-Liner catalogue) | 220 V |
| Studs / keys | Screws, pins, washers and keys; E64 electrode for RA and RAR aluminum keys | Aluminum and steel studs and keys up to Ø 0.23 in |
| Gun / control | PSC short-cycle gun, 3 m; mass tips 48, 77 and 108 mm | Linear-motor digital gun, dual ground electrodes, synergic and manual |
| Station | CR200 Workstation versions add carbon-fiber pull bars, pullers and support bases | 1600 cart kit and Expert 200 combi station available |
| Price | $8,388.36 list (spotter) Found online: Toyota/Lexus Approved Dealer Equipment CAR48201, seen Oct 3 2026 | Request pricing · See it |
Capacitor discharge or drawn arc? Our aluminum dent repair guide walks through it.
Car-O-Liner PNP90 XT2 vs GYSPRESS 10T and Hand Cannon
| Car-O-Liner PNP90 XT2 | GYSPRESS 10T PP Control | Hand Cannon SPR-5-DFC | |
|---|---|---|---|
| Force | 10 tons, adjustable with pressure limitation (PNP90: 6 tons) | 10 tons | Up to 80 kN (8 tons), digital control, 9 presets |
| Drive | Pneumatic-hydraulic, hydraulic actuator XT2, hose package | Pneumatic-hydraulic, push-pull control | Battery, two 18 V 4 Ah, ~1 h charge |
| Tooling | Rivet clamp NB45, punching and flow-form rivet kits; OEM mandrel kits for BMW, Ford, JLR, VW/Audi, Mercedes-Benz | HR110 arm standard; OEM die sets available | Magnetic post-style threadless dies |
| Blind rivets | BNW25 blind rivet gun add-on from the same pump | not printed | — |
| Readout | not printed | Digital pressure control | Live and achieved pressure, work time, battery |
| Price | Dealer quote No published US program price found, seen Oct 3 2026 | Request pricing · See it | Request pricing · See it |
Lighter duty: the Hand Cannon SPR-5 (25–55 kN, Request pricing) and the GYSPRESS 10T with HR110 arm (Request pricing). More on riveting and bonding.
Questions shops ask
What is the GYS equivalent of a Car-O-Liner CTR9?
The GYS PTI Genius Plus is the closest match: a 14,500 A transformer-gun spot welder with up to 600 daN of clamp force, a motorized boom and a liquid-cooled gun. The GYS PTI NEO (14,000 A maximum, 550 daN, 30 A circuit) is the smaller alternative. The full side-by-side is in the table above.
What is the GYS equivalent of a Car-O-Liner CMI300 Pulse Trio or Duo?
The GYS Autopulse 220-M3 for the Trio and the Autopulse 220-M2 for the Duo. Both are single-phase pulsed MIG/MAG generators with integrated wire feeders for steel, aluminum and brazing wire, so one machine covers the same three jobs without changing liners or spools.
What does GYS offer against the Car-O-Liner CR200 spotter?
The GYSPOT Arc Pull 200, a drawn-arc puller for aluminum and steel studs and keys, sold on its own or as the Expert 200 combi station. See the dent repair table above.
Does GYS or Hand Cannon have a rivet system like the Car-O-Liner PNP90 XT2?
Yes. The GYSPRESS 10T is a 10-ton pneumatic-hydraulic self-piercing rivet system, and the battery-powered Hand Cannon SPR-5-DFC reaches 80 kN with digital force control. Both are in the riveting table above.
Can I trade in my Car-O-Liner welder?
Yes. We take Car-O-Liner spot welders, MIG welders and rivet systems in trade toward new GYS or Hand Cannon equipment. See the trade-in section on our used equipment page.
Where do these specs and prices come from?
Car-O-Liner figures are from Car-O-Liner's published brochures, catalogue and product pages. GYS and Hand Cannon figures are from the GYS datasheets and our product pages. Where a manufacturer doesn't print a value, the table says so. Car-O-Liner doesn't publish machine prices on its own site. Where a Car-O-Liner price is shown, it is a published list price for that configuration, with the seller and the date we saw it; actual dealer pricing varies. Where no published US price exists, the cell says dealer quote. Our prices are read live from our store.
Have a Car-O-Liner now?
Trade it in toward a new GYS or Hand Cannon, or ask us about reconditioned equipment.
Car-O-Liner, CTR9, CMI300, CR200, PNP90 and CBR2000 are names of Car-O-Liner Group AB / Snap-on Incorporated. Car-O-Liner figures are taken from Car-O-Liner's published Joining & Heating catalogue, CMI300 Pulse brochure, CTR9 product page and automaker program listings (read October 2026); where Car-O-Liner's own documents give two figures, the spec sheet is used. CRTE is not affiliated with Car-O-Liner.
