GYS 041608 — Steel Liner for MIG Wire 1.0/1.2 mm, 3 m (Red) | Pro Spot 50-7005 Equivalent
GYS steel MIG wire liner sized for 1.0/1.2 mm steel wire, 3 meters, color-coded red. Fits GYS steel MIG torches and cross-references to Pro Spot's 50-7005 liner. Replace it when wire feed gets rough — a worn liner is one of the most common causes of feed trouble on steel MIG jobs.
Choose Quantity
Equivalent for Pro Spot 50-7005 · ships as GYS 041608
This is a cross-reference so you can find it by the number on your parts sheet — not a Pro Spot-manufactured part.
Steel Liner for MIG Wire, 1.0/1.2 mm, 3 m (Red)
Fits GYS Steel MIG Torches · GYS Ref. 041608
This liner runs the length of the MIG torch cable and guides steel wire from the drive rolls to the contact tip. Over time it picks up wire shavings and wears from friction, which shows up as rough feed, burnback, or arc instability. Sized for 1.0/1.2 mm steel wire and color-coded red to match GYS's sizing system. Swapping a worn liner is one of the quickest fixes for inconsistent MIG feed and is cheap preventive maintenance on a busy shop torch.
Why Keep This On The Shelf
- Steel liner sized for 1.0/1.2 mm wire — the most common size for structural and panel steel repair
- Rough or inconsistent wire feed is often a worn liner, not the gun or drive rolls
- Red color-coding matches GYS's 1.0/1.2 mm sizing to avoid grabbing the wrong liner
- Cross-references to Pro Spot 50-7005 for shops running mixed equipment
Specifications
| Type | Steel MIG wire liner |
| Wire Size | 1.0/1.2 mm |
| Length | 3 m |
| Color | Red |
| Fits | GYS steel MIG torches |
| GYS Ref. | 041608 |
| Sold by | Innovative Solutions CRTE |
| EAN | 3154020041608 |
